This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
ROTARYHEATER VALVE KIT Supplied with 1.1mtr cable and a 15mm inlet/outlet valve. The Rotary bezel is 54mm diameter and fits in an 11mm hole. Requires 75mm clearance behind. #RVROT £25 (£30 inc vat)
HEATER / AIRCON CONTROL PANEL This textured, black plastic panel - Size 61mm x 166mm is pre-assembled with a 3-speed fan switch, an illuminated ON/OFF Aircon switch, and a rotary heater valve control with a 1mtr. long cable. Four, countersunk, 4mm mounting holes. #CONPAN £35 (£42 inc vat)
ONLINE
360° VIEW
SLIDING HEATER VALVE KIT The Sliding facia is 83mm x 23mm and fits in a hole 74mm x 18mm. It requires 65mm clearance behind. Supplied with 1.1mtr cable and a 15mm inlet/outlet valve. Single screw fixing. #RVSL £25 (£30 inc vat)
ONLINE
360° VIEW
HEATER VALVE Very simple rotary flow control valve which can be mounted through the dash or cockpit panel. To fit hose I.D.: 12mm (1/2") #HTRV12 £12 (£14.40 inc vat) 15mm (5/8") #HTRV15 £12 (£14.40 inc vat)
ONLINE
360° VIEW
THREE SPEED FAN SWITCH Four position switch for our #HEAT3 heater. 20 amp contact rating with push-on knob and shroud. Shroud diameter 55mm. Fits in an 11mm hole. 1/4" spade terminals. #SWFAN2 £7.50 (£9 inc vat)
BOLT-IN HEATER TAKE – OFF Brass and plated steel. Simply bolts into a hole in 50mm or larger rubber water hose. 5/8 in (15mm) hose-tail. #BOLTIN £7.50 (£9 inc vat)
POSITION CONNECTION O I
NONE
HEATER HOSE AVAILABLE
Page 276 To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 II III