This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
STAINLESS STEEL MALE 'T' BLOCK WITH MOUNTING TAB with 7mm hole. Dimensions. 40mm x 43mm M10 x 1 #SSBU10T £14 (£16.80 inc vat) 3/8" UNF #SSBU38T £14 (£16.80 inc vat)
STAINLESS STEEL FEMALE 'Y' WITH SWIVEL UNIONS Dimensions 54mm x 46mm M10 x 1 #SSBU10Y £14 (£16.80 inc vat) 3/8" UNF #SSBU38Y £14 (£16.80 inc vat)
STAINLESS STEEL MALE BULKHEAD 45 DEGREE End to end 45mm M10 x 1 #SSBU1045 £9 (£10.80 inc vat)
STAINLESS STEEL MALE BULKHEAD 90 DEGREE End to end 40mm M10 x 1 #SSBU1090 £9 (£10.80 inc vat)
STAINLESS STEEL MALE BULKHEAD 'T'
Dimensions 48mm x 45mm M10 x 1 #SSBU10BHT £9 (£10.80 inc vat)
STAINLESS STEEL MALE/ MALE UNION FOR OUR RPV VALVE M10 x 1 Supplied with a copper washer #SSBURPV £4 (£4.80 inc vat)
RESIDUAL PRESSURE VALVE Residual pressure valves reduce undesirable 'spongy' feel or excessive pedal travel. They retain a preset pressure of 2lb between themselves and the caliper to reduce the amount of 'return' of the caliper pistons One valve fitted near each caliper will improve brake response and give you a firmer pedal. Overall Size: 50mm long x 17mm hex (across flats). Inlet and outlet port threads M10 x 1mm with concave seats for direct connection to copper brake pipe. NOTE: THE ARROW POINTS TO THE CALIPER #RPVALV £12 (£14.40 inc vat)