This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
UNIVERSAL AIR CONDITIONING KIT If you already have a heater and you just want to install Air Conditioning in you car, here’s a compact yet powerful underdash package. Size 360mm x 290mm x 150mm - . Straightforward installation with our detailed instructions. Cooling capacity 10,800 BTU. Maximum air movement 200cfm. Universal kit includes: •
Under-dash unit with double squirrel cage, three - speed fan, pre-fitted expansion valve and two rocking vane outlet vents on the front facia.
• •
• •
Remote fan speed and temperature control panel pre-wired to harness. Pre-assembled to mounting bracket or can be disassembled for through-the-dash mounting.
Desiccant drier with Trinary safety/radiator fan switch.
Complete set of hose unions, ‘O’ rings and charging/service ports. (Hoses not included but we can supply) Mounting brackets, drain hose and fused power feed cable. All this for only #AIRCON2 £285 (£342 inc vat)
NOTE: Installation requires engine- driven compressor and condensing radiator (possibly with cooling fan). Hose lengths can be determined and purchased after installation of components. See your local yellow pages for car Air Conditioning specialists who will charge and test the system for you.
ONLINE
360° VIEW
FOUR OUTLET PLENUM 350mm x 100mm x 35mm. This is a direct replacement for the standard outlet facia on #AIRCON2. Four 63mm outlet spigots that accept our ‘DCTHS63 perfectly. This plenum allows remote mounting of say, a face vent on each side of the dash and two vents at the base of the screen. #AIRCON2PL £15 (£18 inc vat)
WIRING DIAGRAM FOR #AIRCON2
TRINARY SWITCH IN DRIER
WIRES WITH BLUE TRACE
NOTE
FAN CONTROL SHOWN FOR INFORMATION ONLY
NOT PART OF PACKAGE
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk