This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
FAN SWITCH For use with a relay or our own accessory wiring kit. M14 x 1.5 thread. ¼" Spade connections. On at 87ºC and off at 82ºC #FANSW £12 (£14.40 inc vat) On at 97ºC and off at 85ºC #FANSW4 £12 (£14.40 inc vat) On at 100ºC and off at 95ºC #FANSW2 £12 (£14.40 inc vat) On at 107ºC and off at 97ºC #FANSW3 £12 (£14.40 inc vat)
TEMPERATURE SENDER M10 x 1 Taper thread will fit into our in-line housings (shown below). High temperature insulated fly leads with bullet terminals. Resistance: @ 5ºC - 4.3kΩ 43ºC - 1.0kΩ 100ºC - 140Ω #TEMPS £8 (£9.60 inc vat)
CHECK RESISTANCE MATCHES YOUR INSTRUMENT
HYDRAULIC STOP LIGHT SWITCH M10 x 1 thread Two ¼" spade terminals. #STSH £6.00 (£7.20 inc vat)
FAN SWITCH M22 x 1.5 thread. ¼" Spade connections.
On at 95ºC and off at 86ºC #FANSW5 £12 (£14.40 inc vat)
On at 88ºC and off at 79ºC #FANSW6 £12 (£14.40 inc vat)
OIL LIGHT SWITCH This will switch on your dashboard Oil Light when pressure falls below 5 psi.