This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
HEATER MATRIX AND FAN KIT Are you struggling to find a small heater the right size and shape to fit your car. Why not make your own? Our heater matrix and fan kit comes complete with fully detailed instructions and drawings with pictures showing you how to fabricate your own casing. MATRIX: All aluminium with 15mm inlet and outlet. Weight 640 gms. FAN: Single squirrel cage. Single speed. 2600 R.P.M. 12 volt. 2.5 Amp. 178mm x 179mm x 100mm wide. Outlet 66 mm x 88mm. Air movement 158 cfm. Weight 624 gms MATRIX AND FAN #MFKIT £58 (£69.60 inc vat) MATRIX ONLY #MATRIX £40 (£48 inc vat) FAN ONLY
#SCFAN £28 (£33.60 inc vat) ONLINE
360° VIEW
ONLINE
360° VIEW
Here's the fan linked to the matrix with our #DCTHS75. You can bend the ducting's reinforcing wire to form a rectangle shape that will fit inside the fan housing outlet. Bond it in place with Polyurethane adhesive/sealant.
152mm
INLET &
OUTLET 15mm O.D.
75mm 50mm 195mm 51mm
BUILDERS TIP If your installed radiator isn't quite up to the job, you could use one or two of these as auxiliary radiators. Mount them in the air-flow and plumb them into your heater circuit.
BULKHEAD FLANGES Moulded ABS flanges for con- necting duct hose to bulkheads, air boxes, filters, cooling shrouds, air dams etc. All with 4 mounting holes (6mm). Smaller 3 sizes have two locating tags for easy alignment with pre-cut holes. Material thickness 2mm. Duct hose can be fitted to inside or outside of spigot by bonding or ties. 42mm O.D. spigot (51mm flange) #BHFLA42 49mm O.D spigot (57mm flange) #BHFLA49 63mm O.D spigot (79mm flange) #BHFLA63 74mm O.D spigot (86mm flange) #BHFLA74 All £5 each (£6 inc vat)
ONLINE
360° VIEW
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk