This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
LED FLASHER RELAY For all LED indicator lamp systems. ¼" spade terminals. 30 watt maximum load. #LEDRLY £13 (£15.60 inc vat)
TERMINAL WIRING 2 - +ve Supply L -
Ind. switch 1 - Earth
3 PIN FLASHER RELAY Three 1/4" spade terminals. One pin is an output for a dashboard warning light so you can use just a single, twin arrow warning light. 47 watt maximum load. #FRLY3P £4.50 (£5.40 inc vat)
TERMINALS
X - +12 volt input L - Load (Bulbs) P - Dash indicator lamp
ELECTRONIC FLASHER UNIT For use on 12 volt systems with 2 or 4 x 21 watt bulbs and 2 x 5 watt side repeaters. Blub failure is indicated by extinguished warning light. #ERLY3 £12 (£14.40 inc vat)
HAZARD AND FLASHER RELAY 4 PIN Four ¼" spade terminals in non- standard pattern. 98 watt maximum load.
#HRLY10 £12 (£14.40 inc vat)
- (31) - Neg -12v L - (49a) Lamps- C - Dash warning lamp
TERMINAL WIRING + (49) - +12v Input
HAZARD RELAY 4 PIN SUITABLE FOR CARAVANS AND TRAILERS Four ¼" spade terminals in non-standard pattern. 6 x 21 watt maximum load. 3mm spade terminals pins C2 and 31 on top. #HRLY9 £20 (£23.50 inc vat) Also available without C2 and 31 terminals #HRLY10 £12 (£14.40 inc vat)
FLASHER RELAY Two ¼" spade terminals. 47 watt maximum load. #FRLY7 £4 (£4.80 inc vat)
IF YOU'RE HAVING PROBLEMS OR ARE UNCERTAIN ABOUT ANY WIRING INSTALLATION WE RECOMMEND
THAT YOU CONSULT A QUALIFIED
AUTO ELECTRICIAN
HAZARD RELAY Two ¼" spade terminals. 90 watt maximum #HRLY8 £4 (£4.80 inc vat)
49 31
C 49a
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk