This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Our Bear Claw, anti-burst door latches are probably the easiest-to-fit latches available. The paired latches provide IVA compliant ‘two stage’ latching. The simplest method of installation is ideal for open top vehicles whose doors can be opened by leaning over and opening from the inside. A pull cord ‘Y’ is attached to the upper hole of the latch release lever and the other end secured inside the front of the door. A sleeved bicycle brake cable and solderless nipple or connector from a ‘Choc-Block’ will do the job. Early Minis had a similar system.
ABS DOOR PULL One piece snap-in recessed door pull. Facia size 93mm x 35mm. Will fit into an accurately cut hole 87mm x 30.5mm. For up to 1.8mm panel thick- ness but can be fitted to thicker panels with careful modification
ONLINE
360° VIEW
#DP1 £5 each (£6 inc vat)
ABS DOOR PULL Two piece recessed door pull. Front facia size 123mm x 47mm. Will fit into an accurately cut hole 114mm x 38mm. Rear cover fits on the inside with two screws into the facia, sandwiching the door panel between the two parts. For up to 3mm panel thickness but can be fitted to thicker panels with careful modification. #DP2
£9 each (£10.80 inc vat) ONLINE
360° VIEW
DOOR PULL Moulded black plastic. Footprint 170mm x 30mm. 42mm high. Two 5mm fixing holes at 134mm centres. #DP3
With the addition of a simple mechanism, a push-button release on the outside of the door can convert a horizontal motion to a vertical motion, releasing the catch. The diagram shows just one method of accomplishing this. You can fine-tune the design to your own application. Cut plates ‘A’ and ‘B’ from a piece of 3mm steel and make a spacing sleeve ‘C’. A Powerfile is the ideal tool for cutting away GRP clearances in your door panels.
£5 each (£6 inc vat) ONLINE
360° VIEW
CHROMED METAL DOOR PULL (PAIR) Here's a very nice, classic-style, loose-hinged door pulll. Two countersunk 5mm holes at 120mm centres. 140mm wide x 42mm . Weight 95gms each. #DP4CH £6.50 pair (£7.80 inc vat)
ONLINE
360° VIEW
Page 36
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733