This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
DASH MOUNTED 15mm BRASS HEATER VALVE Great quality valve with moulded ABS mounting bracket. Bracket mounting centres 63mm (2 1/2"). Suitable for dash thicknesses of between 1mm and 13mm. Will require washers or spacers to obtain optimum mounting height. Maximum bracket width 77mm. Maximum rear projection 43mm. Knob facia diameter 55mm. #BHTVD £20 (£24 inc vat)
ONLINE
360° VIEW
BRASS CABLE OPERATED 15mm HEATER VALVE Powder-coated 1.2mm steel mounting bracket with integral clip for securing outer cable. Glass-reinforced nylon actuator arm with four cable mounting holes. 2 x self-tapping mounting screws included. Mounting plate footprint 60mm x 80mm. Maximum height 43mm. CABLE NOT INCLUDED #BCOHV £26 (£31.20 inc vat)
ONLINE
360° VIEW
SLIMLINE ROTARY HEATER VALVE CONTROL Here's a neat device that uses a spiral mechanism to convert a rotary switch movement into a push-pull cable movement. Fits through a 11mm hole in any panel up to a maximum of 4mm thick. Cable length 1 mtr. Maximum 34mm movement of inner cable. Inner cable solid wire 1.2mm diameter. Requires minimum 200mm clearance behind dash if cable is to be bent 90 degrees. NOTE: Do not overbend cable. Minimum 100mm bend radius. #HVCAB £15 (£18 inc vat)
CABLE OPERATED 15mm HEATER VALVE Glass- reinforced nylon construction with integral clip for securing outer cable. Maximum dimension inlet / outlet 92mm. CABLE NOT INCLUDED #COHTV £15 (£18 inc vat)
ONLINE
360° VIEW
ONLINE
360° VIEW
PRODUCTS WITH THIS SYMBOL HAVE A HIGH RESOLUTION 360 degree VIEW ON OUR ONLINE SHOP
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk ISSUE 26 Page 275