This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
BUDGET GEAR UJ Very similar to our #UJG below. Hardened steel pins and bushes and is manufactured to a tolerance of 0.08mm. 23mm diameter x 75mm. Supplied undrilled for machining or welding to your own shaft. Maximum torque 100Nm (885 lb-in). Weight 220gms. #UJG23 £14 (£16.80 inc vat)
ONLINE
360° VIEW
PRECISION UJ’s STEERING
UNIVERSAL JOINT LARGE DIAMETER Hardened steel bushes. Precision manufactured for strength, low friction, accuracy and long life. 37mm dia. x 72mm long. Maximum operating torque 240Nm (2124 lb-in). Undrilled for machining or welding. Weight 477 gms. #UJGL £38 (£45.60 inc vat)
ONLINE
360° VIEW
NEOPRENE BOOT #UJGBL £10 (£12 inc vat)
UNIVERSAL JOINT This joint has four hardened steel bushes and is precision manufactured for strength, low friction, accuracy and long life. 22mm diameter x 75mm. Supplied undrilled for machining or welding to your own shaft. Maximum torque 43Nm (380 lb-in). Weight 196gms. #UJG £28 (£33.60 inc vat)
ONLINE
360° VIEW
CBS BUILDER’S TIP
‘U’ Channel trim is mostly used as panel edging but it can also be used to line large holes. The picture shows a 50mm hole in a 1mm thick aluminium sheet, lined with a short length of TRMU1. Neat, safe and self-securing.
UNIVERSAL JOINT Shorter version of the above joint. 22mm diameter x 45mm. Weight 106gms. #UJGS £28 (£33.60 inc vat)
ONLINE
360° VIEW
FREE NEWSLETTER
NEOPRENE BOOT #UJGB £7.50 (£9 inc vat)
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk
Place an order online or just ask us and you'll receive our regular newsletter by email. It's packed with special offers, hints and tips, new products and customers cars. ISSUE 26