This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
COMPACT REAR FOG #FL5 COMPACT REVERSE #REVL5 We are often asked for small rear fog and reversing lamps and these are the smallest, 'E3' & 'F' marked, legal ones we’ve found. Lens size just 115mm x 43mm x 17mm deep. Overall depth 68mm. Two 6mm holes through casing. Can be bracket mounted below bumper or through a 115mm x 43mm hole in your rear panel. Accepts 21 watt bayonet bulb (not supplied). £16 each (£19.20 inc vat)
REAR FOG #FL3 'E11' & 'F' marked REVERSE #REVL3 Surface mount 120mm x 80mm x 58mm. Very popular on seven type vehicles. Supplied with 12 Volt 21 Watt bulb. 430mm long sleeved wiring harness. 'E11' & 'F' marked. £8 each (£9.60 inc vat)
ONLINE
360° VIEW
BUDGET REAR FOG LAMP 'E3' & 'F' Marked. Size 83mm x 74mm x 48mm 12V/21W. 2 mounting holes @ 55mm centres. Bulb included. #FL7 £5 each (£6 inc vat)
ONLINE
360° VIEW
COMPACT REAR FOG WITH SURROUND #FL5S COMPACT REVERSE WITH SURROUND #REVL5S size 136 x 51mm. Two 5mm holes at 121mm centres. 'E3' & 'F' marked. £16 each (£19.20 inc vat)
REAR FOG LIGHT 'E1' & 'F' marked
Surface Mounting. Size 90mm x 76mm x 54 deep. With 12 Volt 21 Watt bulb. 'E1' marked. Chrome reflector.
#FL2 £8 each (£9.60 inc vat)
YOU CAN FIT ANY SURFACE MOUNT LAMP TO A SLOPING REAR PANEL BY MOULDING AND SHAPING A WEDGE OF BODY FILLER. STICK SELLOTAPE TO YOUR PANEL AND THE BACK OF THE LAMP TO ACT AS MOULD RELEASE. TAPE THE LAMP VERTICALLY IN POSITION AND FILL THE GAP WITH FILLER. REMOVE AND DRESS THE MOULDING, DRILL THE MOUNTING HOLES THROUGH AND PAINT IT BLACK. See Hints pages.