This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
QUICK RELEASE STEERING WHEEL BOSS KIT Black anodised aluminium housing with a clever sprung release system. There is a front face plate (56mm dia.) with three M6 threads on a 45mm PCD to which you can bolt your own simple adapter plate to mount your particular steering wheel. The 25mm A/F, plated steel, hollow, hex- agonal shaft adapter (I.D. 19mm) is welded to the top of your steering column. This snaps and locks into the hub. To release the adapter, just squeeze together the two hub flanges. Weight 291 gms. #QRSW £65 (£78 inc vat)
QUICK RELEASE STEERING WHEEL BOSS A beautifully made splined aluminium housing with a sprung release button. Three M8 female threads on a 45mm PCD. for mounting your steering wheel via a simple adapter plate. Comes with a matching, splined steel sleeve for welding to the top of your steering column. #QRSW2 £18 (£21.60 inc vat)
35mm 19mm
MAKING AN ADAPTER PLATE It's a fairly straightforward job to make a simple
adapter plate for fixing a steering wheel to a boss. The sketch below shows the dimensions and hole sizes for fixing one of these wheels to our Quick Release Boss #QRSW (discarding the horn push). You can use 3mm or 4mm thick aluminium and if you don't have access to a lathe, you can drill, saw and file it to size. A paper template will help you mark out the hole positions.
87mm DIAMETER
6 x 5mm HOLES ON 70mm PCD
44mm
23.3mm
56.4mm
28mm DIAMETER GREAT FOR CHRISTMAS AND BIRTHDAYS. JUST GIFT VOUCHERS
ORDER THEM AND PAY ON YOUR CARD AND WE’LL POST THEM FREE OF CHARGE. THEY CAN BE USED AGAINST ANY PURCHASE FROM THIS CATALOGUE.
3 x 6mm HOLES ON 45mm PCD
Page 46
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733