This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
WARNING: IF CURRENT IS PERMITTED TO PASS DIRECTLY TO EARTH WITHOUT PASSING THROUGH A LOAD THE RELAY / FLASHER UNIT CAN BURN OUT
STANDARD RELAY 30 Amp 4 Pin For simple on/off switching of fans, horns, lamps etc. With removable mount- ing bracket. #RLY4 £4 (£4.80 inc vat)
INDICATOR SWITCH
FLASHER RELAY
+ ve
CHANGE-OVER RELAY 30 Amp 5 pin. For two -operation devices. With removable mounting bracket. #RLY5CO £5 (£6 inc vat)
HAZARD SWITCH #PBHAZL WITH TWIN RELAY WIRING
3 2 1
1 2 3
HAZARD RELAY
+ ve
HAZARD SWITCH #PBHAZL WITH ELECTRONIC
OR LED RELAY WIRING
INDICATOR SWITCH
LATCHING CHANGE-OVER RELAY Momentarily energise the coil and the relay will mechanically latch on one set of contacts. Momentarily energise again and it will change over to the other contact. For Dip/Main beam with
momentary switch. #RLY6LAT £20 (£24 inc vat) NON -STANDARD PIN LAYOUT. WILL NOT FIT IN RELAY BOX
TOGGLE SWITCH SWITCH WITH TWIN RELAYS
#TSHD2DP
ELECTRONIC OR LED
FLASHER RELAY
3 2 1
1 2 3
BILLET ALLOY
+ ve
INDICATOR SWITCH
FLASHER RELAY
BIG HEAD STUD FIXINGS All stainless steel. A tried- and-tested way to add fixing studs between the laminates of glassfibre. Just bond these into the mat and resin of your GRP panels for a low-profile mounting stud. All have a 23mm diameter plate with a threaded stud electro-welded to it. Three sizes: Packs of 5 M4 x 20mm #BIGH4 £7.50 for 5 (£9 inc vat) M5 x 20mm #BIGH5 £8 for 5 (£9.60 inc vat) M6 x 25mm #BIGH6 £8.50 for 5 (£10.20 inc vat)
+ ve
HAZARD RELAY
+ ve
TOGGLE SWITCH WITH
ELECTRONIC OR LED RELAY
#TSHD2DP
INDICATOR SWITCH
ELECTRONIC OR LED
FLASHER RELAY
+ ve Page 120 To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 ISSUE 26