This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
HAZARD SWITCHES There are many switch and wiring configurations for hazard circuits. If you are using a donor loom it would be wise to try to match the original switch functions. The diagrams below show examples of how to wire the specific switches shown. If in doubt we recommend that you consult a vehicle electrician.
ILLUMINATED HAZARD ROCKER SWITCH Chrome bezel. Fits hole 18mm x 36mm. 5mm spade terminals. As supplied in our #HAZKIT (right). Bulb included #HAZSW2 £8.50 (£10.20 inc vat)
HAZARD KIT All you need to add Hazards to your indicator circuit. Illuminated Rocker Switch fits in a hole 18mm x 36mm. Moulded mounting bracket for the switch. Hazard Relay.
Five x 400mm long leads with insulated female spades on one end and an in-line fuse in one of them. #HAZKIT £18 (£21.60 inc vat)
ONLINE
360° VIEW
ONLINE
360° VIEW
HAZARD ROCKER SWITCH Fits hole 18mm x 36mm. 5mm spade terminals. Supplied with example instructions. Requires separate warning light. #HAZSW £6 (£7.20 inc vat)
ONLINE
360° VIEW
PUSH BUTTON HAZARD SWITCH Illuminated Push-Button switch with a bezel size of 34mm x 39mm. Fits in a rectangular hole 30mm x 25mm. 5mm (3/16" spade connections on the back Maximum front projection 14mm in off position, 9mm in on position. 47mm
projection at rear. #PBHAZ £10 (£12 inc vat)
PUSH BUTTON HAZARD SWITCH Illuminated, shower proof, Push-Button switch with a 40mm diameter rubber diaphragm bezel. Fits in a 30mm diameter hole. Suitable for up to 6mm panel thickness. Seven,1/4" spade connections on the back. Front projection 16mm in off position, 53mm projection at rear. #PBHAZR £10 (£12 inc vat)
IGN + ve 15 30b BATT + ve 30 49 49a
R L
FLASHER RELAY
#ERLY2P
INDICATOR SWITCH
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk ISSUE 26 Page 117