This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
MINI CABLE TIE BASE For up to 5mm wide ties. Only 10mm x 16mm x 7mm high. 7mm diameter counterbore will accept our M3 x 20 countersunk screws or 3mm pop rivet.
#MCTBAS £2.50 pack of 25 (£3 inc vat)
CABLE TIE BASE Self-adhesive and or screw fixing. Size 25mm x 25mm. Accepts up to 5mm wide cable ties. #CTBAS £3 pack of 25 (£3.60 inc vat)
MINI CABLE TIES 200 mini multi coloured ties. All 100mm x 2.5. Red, Blue , Green, White and Yellow. #CTMINI £1.50 (£1.80 inc vat)
CBS BUILDER’S TIP
Here’s a simple way to secure cables and hoses on stand- off pillars. This not only keeps everything neat and tidy but minimises chaffing and vibration damage. Stick a self-adhesive Cable Tie Base to your chassis or panel. Cut a 20mm long piece of rubber tubing (6mm fuel hose works fine). Feed the cable tie through the fuel hose, then through the CT base and back up through the fuel hose. Sit your cable or hose on top and tighten the tie.
STAINLESS CABLE TIES 5mm wide x 200mm long. Very strong ties for high heat situations. #SSTIE £7.50 pack of 10 (£9 inc vat)
SELF-ADHESIVE CLIPS Quick and simple fixing of small wires and pipes. White plastic-coated steel with self adhesive backing pads. Just bend up the tab, lay on your wires and bend it down again. Size 20mm x 30mm #SAPAD £4 Pack of 50 (£4.80 inc vat)
BUDGET CABLE TIE PACK 1000 pieces 3 Sizes, 6 colours in handy carry tube. #CTTUBE £7.50 (£9 inc vat)
Page 374
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733