This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
FUEL SURGE TANK POLISHED ALUMINIUM This very clever surge tank is manufactured mostly from one piece of 3mm aluminium sheet. The only weld is on the closing plate on the base so no welds are visible when it's mouunted. A selection of eight 'O' ring fittings is included: 1 x 6mm Hosetail 2 x 8mm Hosetail 1 x 12mm Hosetail 3 x AN6 (9/16" UNF) 1 x AN8 (3/4" UNF) Height (without unions fitted) 195mm. Diameter 108mm. Base 130mm square with 4 x 8mm fixing holes on 100mm square. Capacity 1.5 Litres. Weight (including all unions) 520 gms. #SURGE £82 (£98.40 inc vat)
ONLINE
360° VIEW
IN LINE FUEL TANK BREATHER VALVE In-line version.. 63mm overall length.. 7mm hosetails on either end. #FTBV2 £36 (£43.30 inc vat)
ONLINE
360° VIEW
Selection of unions fitted for illustration
FUEL TANK BREATHER VALVE A clever, 2 ball valve system that: 1. Allows air into the tank to replace used fuel. 2. Allows air out due to expansion and 3. Closes off to prevent fuel escaping either by sloshing or roll-over. Fits through an 11mm hole in the tank (Access from inside the tank is required to fit and tighten the nut). Takes 5mm hose. #FTBV £24.50 each (£29.40 inc vat)
ONLINE
360° VIEW
GREAT ONLINE SHIPPING DEALS
IF YOU ORDER ONLINE, COURIER DELIVERY TO UK MAINLAND
IS ONLY £6 + vat ore
FREE
IF YOU SPEND OVER £100 (not inc. vat)
Page 66 To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 ISSUE 26