This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
CLASSIC ASTON FUEL CAPS All beautifully made in UK. All caps are vented and all are supplied with two fibre sealing washers. Rubber seal and sprung release catch.
2½" x 16 tpi CHROMED BRASS ASTON Vented. 2½" x 16tpi internal thread. Dimensions. 70mm x 112mm. #AST212 £92 (£110.40 inc vat)
ONLINE
360° VIEW
FUEL CAPS
ASTON 3½" BSP POLISHED ALLOY FUEL CAP Very nice cast aluminium with 3½" BSP thread. Sprung release catch and selection of spacing gaskets. 122mm diameter. 170mm end to end. 57mm high. Rubber seal. Vented. #AST35 £180 (£216 inc vat)
This cap can be made IVA compliant by radiusing the catch edges and repainting.
ONLINE
360° VIEW
ASTON 3½" BSP POLISHED ALLOY FUEL CAP WITH ROLLER CATCH Similar to above with sprung roller release catch. Rubber O-ring seal. Vented. Dimensions as above but 77mm high. #AST35R £185 (£222 inc vat)
THESE THREE 3½" CAPS ACCEPT
2¾" x 16 tpi CHROMED BRASS ASTON Vented. 2¾" x 16tpi internal thread. Dimensions. 87mm x 128mm. #AST234 £97 (£116.40 inc vat)
#ASTNECK (BELOW)
ONLINE
360° VIEW
ONLINE
360° VIEW
2¾" x 16 tpi NATURAL ANODISED ALLOY ASTON Vented. 2¾" x 16tpi internal thread. Dimensions. 87mm x 128mm. Gloss finish. Chrome latch. #AST234AN £82 (£98.40 inc vat)
ONLINE
360° VIEW
ONLINE
360° VIEW
NECK FOR ALL 3½" BSP ASTON CAPS Anodised aluminium. 3½" x 11tpi BSP thread with 125mm diameter flange and 51mm (2") hose outlet. Mounting hole PCD 114mm. Supplied with cork gasket and stainless fixings. Machined to accept the locking insert #LOCKIN and the unleaded fuel insert. #FCIN2 #ASTNECK £55 (£66 inc vat)
Page 74
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733