This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
STALK ASSEMBLY IVAOK This assembly offers left/ right indicators, main/dip beam switching, headlamp flash (pull towards you) and horn (press on end) (relay may be required). Pre-wired with a 600mm harness and moulded connector plugs which can be easily cut off and terminals re-made. (matching connectors are not available). Stalk length 190mm. Arm is angled towards the driver and can be carefully re-shaped if necessary. #INDBK £18 (£21.60 inc vat)
HEAVY DUTY INDICATOR STALK ASSEMBLY Here's a chunky indicator switch that has built-in Hazard switch and hazard and indicator warning lights. It is assembled with a steel base that is shaped to accept the Jubilee clip supplied to clamp the switch around a steering column. Electrical connections are 1/4" male spade terminals on the back. The moulded plastic handle (size 125mm long x 25mm diameter) can be removed (see bottom picture) and an alternative handle fabricated as a replacement. To set the Hazard just pull the plate beneath the indicator arm outwards. To release the Hazard function just operate the indicator lever either up or down. #INDHD £16 (£19.20 inc vat)
ONLINE
360° VIEW
R/H INDS
ONLINE
360° VIEW
WIRING SCHEDULE
The two loose flyleads. GREEN/RED Flasher relay GREEN
TWIN GREEN IN BLACK PLUG BROWN PURPLE
GREEN / RED GREEN / WHITE BLUE
BLUE / RED
BLUE / WHITE Page 114
L
Flasher relay Ignition +
Permanent + + Feed to Horn Left Indicators Right Indicators
Feed from Headlight Switch Dip Beam + Main Beam +
L/H INDS P
ELECTRONIC FLASHER RELAY
#ERLY3P
+ ve (X)
We cannot guarantee that the appearance and/or colours of products shown in this catalogue exactly reproduce the appearance and/or colours of the physical products themselves. All sizes quoted are approximate
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 ISSUE 26