This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
UNIVERSAL JOINT Forged Size 80mm long x 45mm maximum diameter. Compact and strong needle roller joint for steering columns & gear linkages. 14mm (9/16") x 36 spline at both ends. Bearing cap pop-out torque tested at 400Nm. Weight 449 gms. #UJF £28 (£33.60 inc vat)
ONLINE
360° VIEW
PRESSED STEEL UNIVERSAL JOINT WITH FORD SIERRA TRIANGLE END One end has the popular 14mm (9/16") x 36 female spline and the other end will accept a triangular shaft as on Ford Sierra columns. Overall length 120mm x 60mm maximum rotating diameter. M8 thread in 'V'd section clamp. Weight 535 gms. #UJP3 £26 (£31.20 inc vat)
UNIVERSAL JOINT Forged Size 82mm long x 51mm maximum diameter. Compact and strong needle roller joint for steering columns & gear linkages. 3/4" (19mm) x 48 spline at both ends. Bearing cap pop-out torque tested at 400Nm. Weight 450 gms. #UJF2 £28 (£33.60 inc vat)
ONLINE
360° VIEW
5/16" UNF HIGH TENSILE BOLT AND NYLOC NUT #516UNFBN SAE Grade 5. 1¾" long. ¾" unthreaded. £1.50 (£1.80 inc vat)
ONLINE
360° VIEW
STEERING COLUMN LINK Here's a cost-effective way of making a custom steering column. Can be used as-is or cut down or extended or cannibalised for it's component parts. Overall 460mm long with a 40mm collapsing/adjustment section. 48 x 3/4" spline on both forged steel UJ's. Rubber vibration damping section. The shaft is 210mm long and has a cross section like a house with a pitched roof (see picture). One end of the shaft is clamped to the lower, cast steel section of the vibration damper and secured with staked fixings. Weight 2 Kg. #COLLNK2 £65 (£78 inc vat)
ONLINE
360° VIEW
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk