This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
ENGINE START PUSH BUTTON Illuminated red button with chrome surround. 15 Amp contacts. Fits in a 22mm hole. Bezel diameter 29mm. Approximately 40mm rear
ENGINE START PUSH BUTTON WITH BLACK BEZEL Illuminated red button with moulded black surround. 0 Amp contacts. Fits in a 22mm hole. Bezel diameter 29mm. Approximately 40mm rear projection. Maximum panel
thickness 5mm. 12 volt. #PBSWENGBK £12 (£14.20 inc vat)
PULL WHITE CLIP TO RELEASE BUTTON ASSEMBLY
START BUTTON TERMI- NAL CONNECTIONS
TO RELEASE BUTTON ASSEMBLY LOOSEN
THE TWO ANGLED SCREWS AND ROTATE THE CHROME BEZEL ANTI-CLOCKWISE
START BUTTON TERMINAL CONNECTIONS 3 - LIVE FEED FROM IGNITION SWITCH 4 - TO STARTER (small terminal on solenoid) X1 - NEGATIVE FOR ILLUMINATION X2 - POSITIVE FOR ILLUMINATION
REMOTE ILLUMINATED PUSH BUTTON ENGINE START KIT 38mm diameter chrome bezel on aluminium bodied switch housing with 1.4mtr lead that mounts in a 30mm hole and plugs into the remote relay module. Module size 50mm x 50mm x 30mm has 500mm leads and can be fixed with double-sided tape and/or screws provided. #RPBENG £30 (£36 inc vat)
ONLINE
360° VIEW
3 - LIVE FEED FROM IGNITION SWITCH 4 - TO STARTER (small terminal on solenoid) OTHER TWO CONNECTIONS ARE +12v and -12v FOR ILLUMINATION