This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
SPRING STEEL SPEED CLIPS The classic fixing for trim panels, lamps etc. Two sizes: For No.6 screws (right) 11x16mm for up to 1.5mm thick panels. #SC6 £7.50 pack of 100 (£9 inc vat) For No.8 screws (left). 13x15mm for up to 2mm thick panels. #SC8 £7.50 pack of 100 (£9 inc vat)
QUARTER TURN FASTENERS
PACKS OF 100
M6 SPIRE CLIPS Pack of 5 plated spring steel 0.9mm thick. For panels up to 2mm thick. Size 18mm x 26mm. M6 threaded nut centre 10.4mm from edge of panel. #M6SPIRE £3.50 pack of 5 (£4.20 inc vat)
CHROME HEAD QUARTER TURN FASTENER WITH BACKING PLATE. These quarter-turn fasteners were designed for fixing together two, 2mm thick panels. The plate (receiver) is slid over the edge of the lower panel and a clearance hole is drilled through the panel. A 6mm hole is drilled through the top panel and the fastener is pushed through and twisted just a quarter of a turn, locking it in place. A rubber washer prevents vibration and protects the top panel's surface. If your panels are thinner than 2mm you can use 'Doublers' - small pieces of panel glued to the first to increase it's thickness. Chrome head diameter 12mm. Shaft diameter 6mm. Hole centre distance from edge of lower panel 13mm. Dimension from underside of rubber washer to end of shaft 17mm CHROME HEAD FASTENER #CQT17 £3 each (£3.60 inc vat)
10.4 mm
GREAT ONLINE SHIPPING DEALS
IF YOU ORDER ONLINE, COURIER DELIVERY TO UK MAINLAND IS ONLY £6 + vat or
FREE
IF YOU SPEND OVER £100 (not inc. vat)
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk ISSUE 26 Page 385