This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
SWITCH PANEL 3 Features an LED Toggle switch with Red Doomsday Cover and a push button ‘START ENGINE’ switch on an Aluminium, Carbon Fibre effect panel 95mm x 65mm. Relay, mount and wiring is included. Panel can be reversed and polished. #SWPN3 £22 (£26.40 inc vat)
ONLINE
360° VIEW
WIRING FOR #SWPN3 and #SWPN4 Accessory switches on #SWPN4 are standard on/off function
The toggle switch earth must be connected for the LED to light.
E.g. Oil Pres- sure Switch but can be any other function
To small terminal on starter solenoid
X2 + ve and X1 earth to light LED in start button. Connect to dash light circuit if you wish (will only work if polarity is correct
X2 X1
3 4
Red lamp on panel is LED and can be used for oil warning light for instance as shown here. Note: white wires are unmarked so check correct polarity (LED lights will only work if + veand -ve are correct)
Blue to ignition controlled circuits - coil, fuel pump fuse box etc
Red to Battery +ve Black to Earth
Cut and extend the White Link Wire andcon- nect to switch terminals
SWITCH PANEL Aluminium panel with carbon Fibre effect finish. LED toggle switch with doomsday cover, engine start push button and 3 On/Off toggle switches. Wiring and relay included. Size 150 x 65mm. Panel can be reversed and
LIGHTING AND ACCESSORY WIRING KIT Relay, In-line fuse holder with 15 amp fuse plus all the cable and terminals you need to connect extra lights, horn, cooling fan, etc. With wiring diagram. All cable lengths 2mtrs. #WIRKIT £7 (£8.40 inc vat)
ONLINE
360° VIEW
STANDARD RELAY WIRING DIAGRAM
EARTH
EARTH To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk ISSUE 26 Page 113