This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
CAR HEATER Requires hot water feed from your engine. Here’s an even more compact version of our popular heater. Only 10½" (270mm) wide x 4½" (127mm) high x 7½" (190mm) front to back. And still with a massive maximum heat output of 4.3 KW!! - enough for a 4-seat saloon. Simple plumbing - 15mm inlet and outlet. Maximum air-flow 230 m³/hr. High efficiency copper core matrix with aluminium fins. Two speed, double squirrel-cage fan with 450mm fly leads Supplied with wiring, connectors, in-line fuse and rotary control switch. Multiple mounting options -horizontal, vertical or on it’s side. Easy to mount with simply-fabricated brackets. Can be used alone or fitted with the plenum below for air distribution to cabin, dash and screen as required. All this, weighing-in at less than 2Kg!! Instructions included. #HEAT2 £110 (£132 inc vat)
NEW
LOWER PRICE
#HEAT2 HEATER WIRING INSTRUCTIONS FUSE
A
IGN LIVE (POS)
ORANGE C B RED NEG BLACK HEATER
SLIMLINE PLENUM 2 x 1 ½" (38mm) outlets and 2 x 2 ½" (63mm) outlets. Mounts directly over the front of the heater. Can be screwed and bonded. Outlets supplied capped for you to cut as required. #SPLEN £15 (£18 inc vat)
SWITCH
LESS THAN 2 Kg
ONLINE
360° VIEW
ALUMINIUM ANGLE Cuts easily with a hacksaw. For making simple mounting brackets or joining long panels. We can ship up to 2 mtrs length but smaller lengths are cheaper to ship.3 sizes available: 15x15x1.5mm (5/8"x5/8"x1/16" ) #ALIAN1 £3 mtr (£3.60 inc vat) 25x25x3.1mm (1"x1"x1/8")