This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
PROFESSIONAL BRAKE PIPE FLARING TOOL If you’re making loads of brake pipes then this excellent flaring tool is a must have. Superbly engineered from hardened and plated steel. It’ll last a lifetime. Simple, vice mounting. Precision machined Tube grips will not mark the copper. Forms perfect ball-end, single and double flares on copper and copper/nickel tube. Large Tommy Bar for effortless use.
Grips and Dies and grips for 4.75mm (3/16") and 6mm (¼") tube included. #PROFLARE £110 (£132 inc vat)
BRAKE PIPE FLARING KIT Excellent quality tool will form single and double flares on copper or aluminium tube O.D. sizes: 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8". Adjustable clamping pressure. Simple to use both on and off the car. Full, clear instructions. ALSO included free pipe cutting tool. Will cut from 3/16 inch brake pipe to 22mm copper or Ali.. #FLARE £28 (£33.60 inc vat)
THE DIE STRIP IS SUPPLIED IN ONE PIECE BUT WE RECOMMEND THAT YOU CUT IT INTO THE SIX SEPARATE DIES BEFORE USE
NOTE: OIL THE ANVIL THREAD LIBERALLY TO MAXIMISE IT'S LIFE
DIE STRIP Available separately #FLSTRIP £7.50 (£9 inc vat)
ONLINE
360° VIEW
PIPE CUTTER
Will cut from 5mm to 22mm copper tube. #PIPECUT £3 (£3.60 inc vat)
ONLINE
360° VIEW
CALIPER & DRUM PAINT 900ºf GLOSS, Resists chemi- cals & brake fluid. Net weight 11 ounces (311 grams) RED
BRUSH ON CALIPER PAINT KIT Solvent cleaner aerosol 11oz (311gm) and high temperature, chemical and fluid resistant paint (170gm) with an applicator brush. Durable and long lasting. (Ensure all loose rust and corrosion is treated before application) RED #CALRD BLUE #CALBU £18 (£21.60 inc vat)
Page 24 To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 ISSUE 26