This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
SEAT BELT FIXING KIT A selection of bolts (High tensile, grade 8), washers and spacers to suit most retractable and static seat belts (check kit contents are adequate for your installation).
All threads 7/16 unf. (bolts from left to right) 1 x Hex head bolt @ 37mm thread length. 1 x Hex head bolt with integral washer and 7mm long x 13mm diameter plain shaft and 27mm thread length
1 x Thin hex head bolt with 25mm thread length 1 x Hex head bolt @ 20mm thread length 1 x 19mm diameter spacer @ 19mm long 1 x 19mm diameter spacer @ 14mm long 1 x 19mm diameter spacer @ 5mm long 1 x 13.3mm diameter sleeve @ 7mm long 2 x wavy friction washers. Sorry, we cannot split or add to packs. #SBFIXK £14 each (£16.60 inc vat)
ALL BLACK LONG (no logos) #SALLBKL £55 each (£66 inc vat)
HARNESS EYE BOLT & MOUNT KIT Four high tensile (8.8) plated eyebolts with 7/16" x 22mm long threads. Four plated steel backing plates 52mm x 25mm x 6mm thick. Tapped 7/16" UNF. Each plate has a drilled 6.4mm hole for mounting the plate.
#EBK £14 (£16.80 inc vat)
HARNESS FIXING PLATE A plated steel reinforcing / backing plate with a welded 7/16" UNF nut for seat belt mounting points. 55mm x 55mm x 2mm thick. There is a 5mm drilled location hole in one corner. #716RP £2 each (£2.40 inc vat)
EYEBOLT Strong, forged eyebolt. Heavy gold colour plating. 7/16" UNF thread 15.4mm hole in eyebolt. 22mm thread. #EB71622 £3 each (£3.60 inc vat)
32mm thread. #EB71632 £4 each (£4.80 inc vat)
Page 240 To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 ISSUE 26