This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
FLEXIBLE EXHAUST COUPLINGS Weld this joint into your exhaust system to reduce vibration and isolate engine movement. All stainless flexible bellows construction with braided stainless steel inner lining and outer casing. Weldable ends. Will comfortably flex up to 5%. Overall length 207mm (8¼")
FLEXIBLE EXHAUST COUPLINGS WITH STUB ENDS Weld this joint into your exhaust system to reduce vibration and isolate engine movement. All 304 stainless flexible bellows construction with braided stainless outer casing. Weld, or split and clamp ends. Will comfortably flex up to 5%. End stubs all 45mm long x 1.5mm wall thickness. Five sizes, all 305mm long: 38.6mm (1.5") I.D. Wt. 711gm #FLEXH385 £22 (£26.40 inc vat) 45.5mm (1.75") I.D. Wt. 855gm #FLEXH45 £24 (£28.80 inc vat) 51.4mm (2") I.D. Wt 958gm #FLEXH51 £26 (£31.20 inc vat) 57.5mm (2.25") I.D. Wt. 1006gm #FLEXH57 £28 (£33.60 nc vat) 76.5mm (3") I.D. Wt. 1412gm #FLEXH76 £30 (£36 inc vat)
ONLINE
360° VIEW
STAINLESS FLEXIBLE EXHAUST PIPE Nicely manufactured from 304 stainless steel. Dimensions listed are ID but these can be increased or decreased slightly by twisting the pipe thus tightening or loosening the interlocking wrap design. The pipe can be cut with a grinder and welded or brazed to your system. The minimum bend radii shown are approximate. Wall thickness approximately 1.5mm. Available in 1 mtr or 2 mtr lengths. 38mm ID #SSFEX38 (bend rad. 150mm) £12 mtr (£14.40 inc vat) 45mm ID #SSFEX45 (bend rad. 175mm) £15 mtr (£18 inc vat) 51mm ID #SSFEX51 (bend rad. 320mm) £18 mtr (£21.60 inc vat) 57mm ID #SSFEX57 (bend rad. 360mm) £20 mtr (£24 inc vat) 63mm ID #SSFEX63 (bend rad. 250mm) £22 mtr (£26.40 inc vat)