This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Satin anodised aluminium body and handle of superb quality. M10 x 1mm female threads with concave seats. Four M5 fixing threads on a 28mm x 25mm rectangle. Body size: 36 x 26 x 31mm. Lever length 120mm. Weight 154 gms. #LINELOC £32 (£38.40 inc vat)
REMOTE SERVO BRAKE BOOSTER Add servo assistance to your car. If you have twin master cylinders with a balance bar or dual master cylinder 2 units may be required. This unit can be mounted anywhere and plumbed between the cylinder outlet and the brakes. Supplied with two mounting bracket options, a metre of servo hose and even a length of preformed steel brake pipe and unions. 3/8" UNF inlet & outlet and 10mm hose tail. Chamber diameter 180mm. Overall end to end 260mm. Boost ratio 1.9 to 1. #REMSERV £160 (£192 inc vat)
260mm
ONLINE
360° VIEW
BRAKE PROPORTIONING VALVE Install in your braking system to correct the effect of non-standard weight distribution found on many kit cars. Up to 57% pressure reduction in either front or rear brake lines enables you to fine tune the brake balance or dial in different braking characteristics for wet or slippery conditions. Overall Size: 95mm x 40mm x 30mm.
IF YOU ORDER ONLINE, COURIER DELIVERY TO UK MAINLAND
IS ONLY £6 + vat or
FREE
IF YOU SPEND OVER £100 (not inc. vat)
Page 18 To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 ISSUE 27
ONLINE
360° VIEW
BRAKE PROPORTIONING VALVE Install in your braking system to correct the effect of non-standard weight distribution found on many modified cars. Up to 60% pressure reduction in either front or rear brake lines enables you to fine tune the brake balance or dial in different braking characteristics for wet or slippery conditions. Overall Size: 86mm x 43mm x 19mm. Fits in a 19mm hole. Knob diameter 32mm. Two mounting holes 7mm dia. counterbored on one side. Inlet and outlet port threads M10 x 1mm with concave seats for direct connection to copper brake pipe.
NOTE:ARROWS STAMPED INTO THE BODY SHOW INLET AND OUTLET #BRKPROP2 £29 (£34.80 inc vat)