This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
PULL CABLE Great for remote bonnet or boot release. Solid 1.2mm diameter, 700mm long inner cable with a 36mm diameter rubber finger-pull on one end and nothing on the other end. 540mm long outer cable with steel ferrule on each end. Weight 65 gms. #PULLCAB £5 (£6 inc vat)
BALL AND BARREL NIPPLE ENDS CABLE Multi-strand 1.5mm diameter, inner cable with a 6mm ball nipple on one end and a 6mm diameter x 8mm long barrel nipple on the other end. Inner cable 960mm long Outer cable 900mm long x 6mm diameter. 11mm diameter plastic ferrule on each end. There are also three plastic mounting clips that snap around the outer cable and press into a 6mm hole. Weight 75 gms. #BALLCAB £4 (£4.80 inc vat)
PEDESTAL 28 LED BRAKE LIGHT Black ABS body with red lens. Supplied with a removable swivelling pedestal mount for screw fixing to a horizontal or vertical surface or can be secured with double-sided pads (included). Simple two wire connection. Size 255mm x 45mm x 25mm high without mount or 65mm high with mount. 2 mtr. lead. Weight 100 gms. #LEDST2 £12 (£14.40 inc vat)
1mm CUTTING DISC. 76mm diameter x 1mm thick with a 10 mm hole. These discs are suitable for cutting stainless steel tube, pipe, bar and even our stainless braided hose (don't forget to wash it out before fitting). See the instructions in the Hints and Tips pages at the back of this catalogue. #D76X1 £2.50 each (£3 inc vat)
FUEL PIPE CLIPS For one 5/16" (8mm) copper or steel pipe. Pushes into a 5/16" (8mm hole. #BPC8
£5 pack of 5 (£6 inc vat)
BRAKE PIPE CLIPS For three 3/16" brake pipe. Pushes into a 6.5mm (1/4") hole. #BPC3
£5 pack of 5 (£6 inc vat)
Page 526
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733