This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Chromed metal construction. Flat glass. Will mount to a vertical windscreen support or door frame up to 10mm thick using two grub screws. With a little ingenuity you could remove and modify the clamping plate and replace the two plate-securing screws with studs so that you can surface mount the mirror on a door top or scuttle. Spherical mount between stem and mirror base allowing rotational movement and approximately 80 degrees angular movement. Mirror frame diameter 100mm. #MCORND £20 each (£24 inc vat)
ONLINE
360° VIEW
CLIP-ON RECTANGULAR MIRROR
Chromed metal construction. Flat glass. Will mount to a vertical windscreen support or door frame up to 8mm thick using two grub screws hidden under a removable cover. Spherical mount between stem and mirror back allowing approximately 50 degrees total movement angle. Mirror frame size 115mm x 73mmm. Mounting frame can be reversed for fitting to forward or rearward facing flanges. #MCOREC £20 each (£24 inc vat)
ONLINE
360° VIEW
MIRROR REPAIR Here's a 'get-you-out-of-trouble', plastic, mirror panel. Size 125mm x 200mm x 0.7mm thick. Flexible and easy to cut with a craft knife or scissors. It is supplied with a removable protective film and three double-sided adhesive pads. Just cut it to shape and stick it over the top of your broken mirror glass. #MIREP £3 (£3.60 inc vat)
CLIP-ON BULLET MIRROR Chromed metal construction. Flat glass in a floating, dished glass housing with approximately 50 degrees of angular adjustment in the mirror body. A diecast arm is rubber-mounted to the mirror body and will rotate 360 degrees. There is a spherical ball joint between the arm and mounting foot that has approximately 80 degrees of angular movement. The clip- on mount will fit to a vertical windscreen support or door frame of up to 10mm thick using two grub screws. Two black plastic packing pieces are supplied. With a little ingenuity you could remove and modify the clamping plate and replace the two plate-securing screws with studs so that you can surface mount the mirror on a door top or scuttle. Mirror diameter 100mm. Bullet front to back 110mm. Arm length 50mm. Mounting base footprint 45mm x 30mm. #MCOBUL £20 each (£24 inc vat)
ONLINE
360° VIEW
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk