This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
OIL CATCH TANK Fabricated, TiG welded Aluminium oil catch tank. Supplied with a vented cap, two 13mm OD brass unions with 'O' ring seals, sight gauge, drain plug with rubber seal and two blanking plugs. You can swap the position of the sight gauge and unions to suit your installation. Four, 6mm mounting holes at 175 x 175mmmm centres. 3 LITRE NATURAL 3 Litre capacity. Maximum dimensions: 195mm wide x 275 high x 102mm front to back Weight 895 gms.
#OCT350 £118 (£141.60 inc vat)
DISTRIBUTION & FUSE BOX There are three independant supply connections on this useful box - A Negative (earth) distribution with one M5 threaded stud input post and 12 x M4 threaded output screws. The Positive side is split into two seperate busbars, each with an M5 threaded stud input and 6 x fused outputs so you can have a permanent live side and an ignition-switched side. (fuses not included). You can use either ring or fork terminals on all the input and output connections. The clear plastic cover is secured or removed with half a turn of the red knob. Overall size: 165mm x 95mm x 57mm high. Four, 5mm dia. fixing holes at 140mm x 75mm centres #FB12DST £32 (£38.40 inc vat)
REAR COVER REMOVED
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk