This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
FUEL PUMP This excellent quality pump is now available in two versions. One (#FPUMPS) is a 'Suction' version best used for installation in your engine bay. The other (#FPUMP) is a 'Pressure' version for mounting near the fuel tank. 12 Volt. Flow rate 125 Lt/hr. Integral 8mm swivelling inlet & outlet unions. Size 73mm x 128mm. Mounting bracket & fixing screws included. Made in Germany.
Not suitable for Bio Diesel. ECE Approved NOTE: We always recommend the use of a pre-filter with all fuel pumps. #FPUMP Pressure 4.2 psi. Suction -1.4 psi. £68 (£81.60 inc vat) #FPUMPS Pressure 2.1 psi. Suction -2.8 psi. £68 (£81.60 inc vat)
61mm ANALOGUE TACHOMETER WITH DIGITAL WATER TEMP DISPLAY. This superb instrument has a 61mm diameter brushed stainless bezel, 55mm diameter x 46mm deep stainless housing with two M5 x 17mm long studs on the back. It can be fitted in a 55mm hole in your dash (if you make a simple 'U' bracket), or with the single bolt, rubber mounted bracket. Water temp sensor included with 1/8" NPT thread, mounting brackets, wiring and connectors are included. Blue backlight. Full installation instructions included. 12 volt. Weight 190g.
This instrument offers several options for collecting a RPM signal. From simply wrapping a wire five times around a spark plug, to connecting directly to the coil +ve or -ve. TACHOMETER RANGE 0 - 9400 rpm. TEMPERATURE RANGE 0 - 150ºC (32 - 302ºF) #AT619BK £105 (£126 inc vat)
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk