This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
INTERMEDIATE 'PROPER' CRIMPING TOOL This compact tool will crimp all small, non-insulated terminal types including industrial and aviation quality 'F' crimp open barrel and spade terminals. Precision ground, hardened steel jaws that roll the terminal flags, binding them tightly into the cable and insulation. Spring return jaws and integral wire cutter. 185mm long. Tool only. #CRPTL2 £15 (£18 inc vat)
LIGHTING AND ACCESSORY WIRING KIT Relay, In-line fuse holder with 15 amp fuse plus all the cable and terminals you need to connect extra lights, horn, cooling fan, etc. With wiring diagram. All cable lengths 2mtrs. #WIRKIT £7 (£8.40 inc vat)
STANDARD RELAY WIRING DIAGRAM
EARTH
EARTH NARROW CRIMPING TOOL
If you're on a limited budget or you only need to make a few quick connections then here's a rare and very inexpensive tool that may be right for you. Again it's designed for crimping smaller 'F ' crimp spade and barrel terminals (NOTE: Not for pre- insulated 'squeeze-flat' terminals.) Integral wire stripper and wire cutter. It even has threaded holes for cutting brass or steel bolts. #CRPTL4 £8 (£9.60 inc vat)
REMOTE IGNITION TESTER. Ideal for deeply inset spark plugs. Push the stiff rubber socket over your spark plug then connect your HT lead to the lamp housing. 245mm overall length. #IGNTS2 £6 (£7.20 inc vat)
IGNITION TESTER Dead simple way to see if you have a spark. Push the tester onto your spark plug then connect your HT lead to the tester. The translucent red tester will flash with the spark plug. 72mm overall length. #IGNTS £4 (£4.80 inc vat)
DIMENSIONS CONVERSION CHART IN BACK PAGES
VAT 20% To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk ISSUE 27 Page 169