This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
PULL CABLE Great for remote bonnet or boot release. Solid 1.2mm diameter, 700mm long inner cable with a 36mm diameter rubber finger-pull on one end and nothing on the other end. 540mm long outer cable with steel ferrule on each end. Weight 65 gms. #PULLCAB £5 (£6 inc vat)
BALL AND BARREL NIPPLE ENDS CABLE Multi-strand 1.5mm diameter, inner cable with a 6mm ball nipple on one end and a 6mm diameter x 8mm long barrel nipple on the other end. Inner cable 960mm long Outer cable 900mm long x 6mm diameter. 11mm diameter plastic ferrule on each end. There are also three plastic mounting clips that snap around the outer cable and press into a 6mm hole. Weight 75 gms. #BALLCAB £4 (£4.80 inc vat)
CONTROL CABLE - SALE ITEM - NO RETURN Here's a heavy duty cable that can be suitable for hand- brakes or clutch. Multi-strand inner cable 1170mm long, diameter 3.5mm with a 8mm hex nipple on each end. Outer cable 1050mm long, diameter 10.5mm. Rubber moisture seal on each end. Maximum travel of inner 92mm. #CONCAB2 £8 (£9.60 inc vat)
NOTE: SALE ITEM - NO RETURNS
CONTROL CABLE - SALE ITEM - NO RETURN Here's a heavy duty cable that can be suitable for hand- brakes or clutch. Multi-strand inner cable 1110mm long, diameter 3.5mm with a 8mm hex nipple on each end. Outer cable 1000mm long, diameter 10.5mm. Rubber moisture seal on each end. Maximum travel of inner 55mm. #CONCAB3 £8 (£9.60 inc vat)
NOTE: SALE ITEM - NO RETURNS
13.9mm 11.6mm
Angle 170º
Angle 140º
13.9mm
11.6mm
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk