This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
SPEEDO SENSOR CONVERTERS Replaces the hall-effect speedo sensor on all our Digital Speedos. Use one of the aluminium threaded adapters below to convert the cable drive outlet of your gearbox from mechanical cable rotation into an electronic pulse signal. Choice of two depending on the colour of the existing sensor cable plug on your instrument - Black or White. WHITE PLUG #SSC1 £28 (£33.60 inc vat)
BLACK PLUG #SSC2 £28 (£33.60 inc vat) TYPE 9 & MT75
#TYP9 £14 (£16.80 inc vat)
#MINI £14 (£16.80 inc vat)
MINI & METRO
M20x1mm (metric extra fine)
INSTALLATION INSTRUCTIONS Fit the aluminium adapter to your choice of cable (White or Black plug according to your matching instrument plug colour). Before you remove your old speedo drive cable count how many rotations of the inner cable you have for one rotation of the road wheel. Every cable rotation is equal to six magnet sensor points on the Hall effect system. So, for instance, if one rotation of the road wheel turns the speedo inner cable 2.5 turns the calculation will be 2.5 x 6 = 15 sensor points (magnets).
Alternatively just program the speedo with 12 sensor points then compare the speed whilst driving with a Sat.Nav. and increase or decrease the number of sensor points accordingly.
SLIMLINE LED GAUGES Simple to fit, surface mount. Just needs a small hole for the wires. Size only 57mm (2¼") x 28mm (1 1/8") x 10mm (3/8") thick Supplied with Scotchloc wiring connectors and Velcro fixing pad. 12 volts. 600mm power connector cable. Operating temperature range -10 - +60ºC. RED LED VOLTMETER #SLEDVR £35 each (£42 inc vat) BLUE LED VOLTMETER #SLEDVB £35 each (£42 inc vat) BLUE LED WATER TEMP #SLEDWT Range 0 - 120ºC. Display unit 1ºC. The meter will flash as a warning if temperature exceeds 120ºC. Supplied with 1/8" npt sender, 1 mtr of sender cable. 600mm of two core power cable.
£35 each (£42 inc vat)
MINI LED CLOCK AND VOLTMETER 24 hour clock and voltmeter with low and high voltage warning function. Digits flash when voltage is below 11.5 volts or over 15.5 volts. Simple to fit, surface mount. Just needs a small hole for the wires. Size only 60mm (2¼") x 30mm (1 1/4") x 11mm (3/8") thick Supplied with Scotchloc wiring connectors and Velcro fixing pad. 12 volts. 600mm cable. Operating temperature range -10 - +60ºC. Operating voltage 12 volts. Weight 22 gms. MINI LED CLOCK and VOLTMETER #SLEDTV £35 each (£42 inc vat)
ONLINE
360° VIEW
Page 200
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733