This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
95mm LED REAR LAMPS 'E4' Marked. Ultra bright LED's. 102mm diameter. Total thickness 32mm. Can be mounted in an 83mm diameter hole or in our housings. Front projection 20mm. Two 4mm mounting holes at 80mm centres. 220mm fly leads WIRING: White - earth. Blue - ind. Red - stop. Green - tail.. RED STOP TAIL #RL60 £45 pair (£54 inc vat) AMBER INDICATOR #RL61 £45 pair (£54 inc vat) CLEAR INDICATOR #RL61C £45 pair (£54 inc vat)
PLINTH Simple addition for surface mounting lights. Only a 12mm central hole in your panel required for wiring. Moulded ABS. 100mm diameter x 24mm high. 4 x 5mm fixing holes@ 66mm centres. 45mm hole in back. ACCEPTS OUR #RLT7 to 12 and with a little simple modification (remove the fixing projections on the inside), our #RL40, 41 and 42. #PLINTH £3.50 each (£4.20 inc vat)
RECESSED PLINTH Here's another option for mounting your 95mm rear lights. Just cut a hole 88mm diameter in your panel and bond or screw-in the plinth. The lamp is then fixed to the plinth with two small self-tappers. Height of plinth above surface is just 8mm. Maximum diameter 99mm. Rear projection 16mm. FITS ALL THE LAMPS ON THIS AND THE PREVIOUS PAGE and with a little simple modification (remove the fixing projections on the inside), our #RL40, 41 and 42. #PLINTH2 £3.50 each (£4.20 inc vat)
DIMENSIONS CONVERSION CHART IN BACK PAGES
Page 242 To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 ISSUE 27