This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
DEMIST VENT Mounts over a rectangular cut-out in your dash top. Ideal for use with our demist plenums. Size 236mm x 30mm. #VENT9 £6 (£7.20 inc vat)
ONLINE
360° VIEW
ONLINE
360° VIEW
DEMIST VENTS Nicely moulded ABS Size 87mm x 14mm. Fits in a hole 71mm x 8mm. Two counterbored 3mm fixing holes @ 77mm centres. Perfect for use with our Demist Plenums. #VENT13 £4 each (£4.80 inc vat)
ONLINE
360° VIEW
SMALLER DEMIST PLENUMS Smaller versions of our popular Demist Plenum for when there is less space under your dash. Single 35mm (1 3/8" ) inlet is supplied capped and is offset towards one end. 38mm ID ducting can be bonded directly to the inlet with Polyurethane adhesive / Sealant. The inlet can also be cut to accept smaller hoses or ducting. Width 51mm including the 7mm fixing flange all round. Height 52mm including the inlet. 2 lengths available 170mm LONG #DEMPL170 £10 (£12 inc vat) 250mm LONG #DEMPL250 £10 (£12 inc vat)
DEMIST VENTS Nicely moulded ABS Size 117mm x 15mm. Two countersunk fixing holes. Perfect for use with our Demist Plenums. #VENT8 £4 each (£4.80 inc vat)
DEMIST PLENUM The solution to demist ducting in those tight under-dash areas. Ideally suited to Sevens but will fit almost anything. Simply cut your demist slots in the dash top and bond this plenum to the underside of the dash beneath them. Single 38mm (1½" ) inlet is supplied capped and is offset towards one end to offer additional mounting op- tions. 38mm ID ducting can be bonded directly to the inlet which can also be cut to accept smaller hoses or ducting. Over- all size 630mm x 75mm wide x 28mm high (not including the inlet spigot). #DEMPL £14 (£16.80 inc vat)
ONLINE
360° VIEW
ONLINE
360° VIEW
DEMIST VENT 206mm x 46mm. Here's a nice two-piece vent that can be fitted either as an assembly from the top of your dash through a 38mm x 172mm hole or separated, sandwiching the dash between the top and bottom sections, through a 33mm x 168mm hole. It will accept our 50mm lightweight ducting #DCTHS50. Two, counterbored 5mm fixing holes at 183mm centres. Overall height 85mm. #VENT14 £15 each (£18 inc vat)
ONLINE
360° VIEW
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk