This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
OVAL AMBER INDICATORS Pair. 'E' 3 Marked. 07mm x 55mm x 14mm thick. Fits in a 30mm diameter hole.
12 volt 10 watt bulb and bayonet bulb holder included. Slight curvature (3mm) on mounting face. Foam gasket included. Secured with 35mm hex plastic nut. 300mm long flylead with bullet terminals. #IN016 £14 pair (£16.80 inc vat)
3mm
IMMOBILISER THATCHAM CATEGORY 2 Simple to use and install. Includes panel-mounted fob receiver socket (fits in a 15mm diameter hole), two coded Key Fobs, sealed module, installation instructions, 1.4mtrs long cable bundle with numbered wires for security. Twin circuit immobiliser. Passive arming. Touch-key operation. Failsafe immobisation. Water resistant. Flashing LED for diagnostics. 12 volt. Power consumption 2.8ma max. Relay current capacity 1. 10A max. 2. 25A max. Module dimensions123mm x 65mm x 32mm. Thatcham approval No: TE21046/0898 #IMMOB £50 (£60 inc vat)
EXTRACTOR SET 5 PIECES It is sometimes impossible to cleanly remove broken studs and bolts - especially if they're rusty but these tapered, fluted, hardened steel extractors offer you a good chance without damaging the female thread. Drill a hole in the stud as accurately and centrally as possible at the size and depth recommended on the packaging, lightly tap in the extractor and turn it anticlockwise. Applying heat from a gas torch will always help. #EXTRACT5 £3 (£3.60 inc vat)
RADIUS GAUGE 15.5mm to 25mm Thirty precision male and female radius gauges between 15.5mm and 25mm in 0.5mm increments. #RADGA2 £3.50 (£4.20 inc vat)
Page 502
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733