This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
STOP LIGHT SWITCH A mechanical switch for mounting directly to your brake pedal. Pull the spring to make the contacts. Overall length 130mm. Switch block has 2 x 4mm mounting holes at 24mm centres. Spring diameter 8mm. Switch block max. dims. 40mm x 33mm wide x 25mm high. Screw terminals. Chrome spring, hook and switch plunger. Weight 30gms. #STSSPR £12.50 (£15 inc vat)
RED / CHROME PUSH BUTTON SWITCH A heavy -duty switch with a 20mm diameter shrouded red button. The plated metal shroud is 25mm diameter and protrudes 20mm from the mounting surface. The plated metal switch body has 26mm rear projection. Fits in a 22mm diameter hole in a panel up to 3mm thick. Screw terminals on rear. 27mm A/F hex on switch body and shroud. 25 Amp. Weight 78 gms. #PBSWRC2 £9.50 (£11.40 inc vat)
FAN SWITCH M22 x 1.5 thread. ¼" Spade connections. 30mm A/F Hex. Weight 60 gms. On at 82ºC and off at 72ºC #FANSW8 £12 (£14.20 inc vat)
ADJUSTABLE COURTESY SWITCH This sprung- plunger- type switch can be used for door courtesy lighting, bonnet and boot lights or as an alarm trigger. It fits in a 10mm diameter hole and it's two 13mm A/F nuts allow a maximum of 17mm adjustment. A 1/4" male spade terminal is one contact and the plated switch body is the other. So, if you're using this switch on a GRP or plastic panel you'll need to ensure that the switch casing is earthed. Overall length 36mm. Maximum plunger movement 9mm. Thread M10 x 1mm. Weight 16 gms. #COURT3 £3 each (£3.60 inc vat)
OIL LIGHT SWITCH This will switch on your dashboard Oil Light when pressure falls below 5 psi. 1/8" NPT thread 1/4" spade connector. Weight 28 gms. #OILSW18 £6 (£7.20 inc vat)
Page 514
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733