This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
CHROMED ALUMINIUM TUBE 50mm O.D. 90° bend. Beautifully formed and chrome plated 1mm wall tube. Ideal for air, water or fuel. Overall size 200mm x 200mm. Can be cut down as required. #ALI90 £16 (£19.20 inc vat)
BLEED VALVE Great for getting air out of those troublesome heater circuits. Straight joiner with a built-in brass bleed valve opened with a knurled thumb screw. Made from glass reinforced nylon. Fits in a 16mm (5/8") hose. Overall length 65mm. 16mm (5/8") BLEED VALVE #BLEEDV £6 (£7.20 inc vat) 19mm (3/4") BLEED VALVE #BLEEDV19 £6 (£7.20 inc vat)
BULKHEAD HEATER HOSE JOINERS If you don't want to run your heater hoses in one piece through a grommet-lined hole in your bulkhead, these joiners could be the answer. Available in straight or 90 degree versions, both accept 16mm (5/8") I.D. hoses. Mounting plate dimensions 90mm x 41mm. Hole size required 50mm x 18mm. NOTE: We recommend using the best quality hose clips for any hot water connections inside the cockpit. STRAIGHT #SBHJ16ST £8 each (£9.60 inc vat)
90 DEGREE #SBHJ1690 £8 each (£9.60 inc vat)
FLOAT SWITCH This little switch may save an expensive engine rebuild by warning you if your coolant level has dropped unexpectedly.
Just make a 22mm hole in your header or expansion tank and insert the float switch and the soft silicone seal. Tighten the nut until the silicone expands, sealing the hole and locking the switch in position. Connect to a live supply and warning light. Can be rotated 180° for high level warning if required. Glass reinforced nylon construction. 350mm fly leads.
Operating temperature up to 110°C. Operating pressure 4 bar.
Magnetic reed switch contacts 1 amp rating. NOTE: CONTACTS MADE WHEN FLOAT IS HORIZONTAL #FLSW £10 (£12 inc vat)
ONLINE
360° VIEW
VALUE COMPOSITE DIGITAL CALIPER Here's a combination of value and accuracy that's hard to beat. Yup - plastic jaws and an easy-to-read LCD digital display that will measure from 0 to 150mm and has an accuracy of 0.1 mm (four thousandths of an inch). You can switch from Metric to Imperial with the press of a button and set the readout to zero anywhere on the scale. Supplied in a hard plastic case.#DCABS £8.50 (£10.20 inc vat)
ONLINE
360° VIEW
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk