This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
0.750" (¾") MASTER CYLINDER WITH LARGE CAPACITY INTEGRAL RESERVOIR #MA75ILR Aluminium. 3/8" UNF outlet thread. Includes Clevis. 125ml capacity. £32 (£38.40 inc vat)
119mm ONLINE
360° VIEW
3/8"unf 40mm 76mm
60mm dia..
57mm
30mm MASTER CYLINDER Cast iron. Piston diameter 30mm. Stroke 38mm. 7/16" unf fluid inlet (shown with red plug) and 3/8" unf outlet (shown with yellow plug). 5/16" unf pushrod thread. 8.7mm mounting holes. #MA30 £28 (£33.60 inc vat)
7/16"unf 105mm 39mm 120mm
DIMENSIONS CONVERSION CHART IN BACK PAGES
VAT 20% Page 6 44mm 143mm ONLINE
360° VIEW
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 ISSUE 27 57mm 3/8"unf 110mm 39mm 143mm ONLINE
360° VIEW
ONLINE
360° VIEW
160mm
MASTER CYLINDER KIT Here’s a very comprehensive pack of parts that offers multiple mounting options for the cylinder and the reservoir. Two reservoirs with interchangeable caps can be mounted either directly onto the cylinder or, using the bracket and adapter supplied, mounted remotely on a bulkhead or inner wing and connected with 10mm (⅜") ID flexible hose. The aluminium cylinder has two mounting options, both using M8 (5/16") bolts, 5/16" UNF push rod thread and a 3/8" UNF outlet thread in the end of the cylinder. Bleed screw on top. Stroke 1.3" (33mm) Also supplied is a reservoir surge diaphragm, IVAOK float/ switch cap and two unions for conversion of the outlet to accept a female flare on the brake pipe and female union. 0.625" #MAK625 £38 (£45.60 inc vat) 0.750" #MAK750 £38 (£45.60 inc vat) 0.825" #MAK825 £38 (£45.60 inc vat) 1"
#MAK1 £38 (£45.60 inc vat)
MULTIPLE MOUNTING OPTIONS INCLUDING STANDARD GIRLING