This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
RED / CHROME PUSH BUTTON SWITCH A heavy -duty switch with a 20mm diameter shrouded red button. The plated metal shroud is 25mm diameter and protrudes 20mm from the mounting surface. The plated metal switch body has 26mm rear projection. Fits in a 22mm diameter hole in a panel up to 3mm thick. Screw terminals on rear. 27mm A/F hex on switch body and shroud. 25 Amp. Weight 78 gms. #PBSWRC2 £9.50 (£11.40 inc vat)
ILLUMINATED CHROME PUSH BUTTON SWITCH Push to make, sprung return. Fits through a 22mm hole in up to 7mm thick panels. Three M4 terminal screws on back for ring terminals. Front projection 17mm. Rear projection 28mm. 50Amp @ 12 volts. TERMINAL 1: +12 in TERMINAL 2: Load TERMINAL 3: Lamp earth. #PBSWCH £13 (£15.60 inc vat)
24 VOLT ILLUMINATED RED PUSH BUTTON ON / OFF SWITCH Will still illuminate dimly on a 12 Volt supply in the ON position or can be used without illumination. Bezel diameter 28mm. Button diameter 21mm. Presses into a 25mm hole. Rear projection 35mm Three 1/4" male spade connectors. 16 Amp. WIRING: 4B - +ve in, 2A - +ve out, 1A - negative for
illumination. #PBSW24V £3 (£3.60 inc vat)
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk