This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
BONNET RELEASE CABLE T - Handle bonnet release cable 1.5 m long. Panel mounting through 9mm hole. No nipple on end. #BONREL £8.50 (£10.20 inc vat)
RED 'T' HANDLE RELEASE CABLE RAC trackday rules now dictate that battery cut-off switches must be mounted inside the vehicle, away from body panels and must be able to be remotely disconnected with a Red 'T' pull cable on the outside of the vehicle. Here's the solution. Just make a simple bracket that will fit on the switch and locate the cable adjuster (supplied). Secure the inner cable to the key with the solderless nipple supplied. Can also be used for bonnet and boot release. Removable red 'T' handle.
3.7mtr Outer cable mounts through a 10mm hole. 4 mtr multi-strand bowden cable inner. Supplied with M6 cable adjuster, Cable ferrule and a solderless nipple. #RTCAB £16 (£19.20 inc vat)
ONLINE
360° VIEW
ONLINE
360° VIEW
CABLE REPAIR KIT Includes: •
• •
• • • • • •
•
1.6mtrs of 1.5mm diameter bowden cable with a 3.5mm to 6mm stepped nipple on one end.
1.6 mtre of 1.1mm diameter bowden cable with a 3mm nipple on one end.
1 x 10mm dia. x 20mm solderless nipple. 1 x 8mm dia. x 12mm solderless nipple 1x 5mm dia. x 8mm solderless nipple
1 x 8mm dia. x 14mm solderless nipple with sleeve and nut. 1 x 7.8mm dia. x 9mm horizontal barrel nipple for 1.5mm dia. cable. 1 x 7.8mm x 15mm shouldered horizontal nipple for 1.5mm dia. cable. 1 x 3.5mm to 6mm brass steed sleeve nipple for 1.1mm cable above.
1x Storage tin for all parts above #CRKIT £8 (£9.60 inc vat) ONLINE
360° VIEW
RED 'T' HANDLE RELEASE CABLE Can also be used for bonnet and boot release. 1.8mtr Outer cable mounts through a 11mm hole. 2 mtr multi-strand bowden cable inner with a moulded-on red plastic 'T' handle. #RTCAB18 £9 (£11.80 inc vat)
ONLINE
360° VIEW
BUDGET CABLE TIE PACK 1000 pieces 3 Sizes, 6 colours in handy carry tube. #CTTUBE £7.50 (£9 inc vat)
CABLE COVER BELLOWS Rubber bellows. Great for protecting control cables from ingress of dirt and grime. Can also be used for protecting wires in flexible installations. e.g. between 'A' post and doors or body and boot lid. 106mm long relaxed. Will compress to 40mm. 20mm maximum diameter. 6mm holes in one end and 7.5mm hole in the other. #CABCOV £2 (£2.40 inc vat)
DIMENSIONS CONVERSION CHART IN BACK PAGES
WIRING INFORMATION IN ELECTRICAL SECTION
To order Tel: 01580 891309 or 07964 336183 or Fax: 01580 893733 or online at www.cbsonline.co.uk ISSUE 27 Page 53