This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Caliper-type jaws permit quick inside measurements accurate to ±.0002" or ±0.005mm. Jaws are hardened and ground on a radius for accurate feel without cramping.
• Satin chrome reading surface is glare free and resists rust • Smooth friction thimble for consistent readings • Lock screw
701 INTERNAL GROOVE MICROMETERS .500-2.500"
Measures grooves for retaining rings and "O" rings, oil grooves, washer grooves, as well as bores and recesses. Depth of grooves up to 5/64" can be measured with 701A; and 7/32" with 701B. Tool is accurate to ±.0002".
• Hardened and ground gaging contacts are .030" thick
• Contacts have flush ends to gage grooves at the bottom of blind holes
700 Inside Micrometer Calipers (.001" Graduation) Range
.200-1.200" 1-2"
Cat. No. 700A 700B
700MA 700MB
• Satin chrome reading surface is glare free and resists rust • Smooth friction thimble for consistent readings • Lock screw