This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
3752 ELECTRONIC HEIGHT GAGES The 3752 Electronic Height Gage is a full featured, versatile and economic solution for most height measurement applications.
All measuring information from these tools can be entered directly into Starrett Data Collection Systems for analysis, data collection and hard copy documentation. They are available in 0-12" and 0-24" ranges.
READABILITY AND CONTROL FEATURES • Clear bar graduations in .100" and 5mm increments • Large (.380"/9.65mm), easy-to-read LCD display reads to .0005" or 0.01mm • Instant inch/millimeter conversion • Carrier and scriber designed to read from zero • "Hold" control feature retains a reading at any position • Plus or minus indication allows reading in proper direction • Ability to set zero at any position • Manual On/Off plus a built-in automatic off after 30 minutes of nonuse
FULL FUNCTION ACTION FEATURES • Large positive action keypad • Ability to retain and return to the true zero reading of the height gage • PRESET button to install any reading at any position • Ability to install minimum and maximum limits • RS232 data output port • Two 3-volt batteries furnished (CR2450)
Specifications for 3752 Electronic Height Gages Resolution Graduations
Both Height Gages shown with optional Auxilliary Circular Carbide Scriber, PT28131. Gages are furnished with Auxilliary Straight Carbide Scriber, PT22357.
3752, 0-12" Height Gage
Height gage with PT99454 indicator holder with 790AZ test indicator