This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
35E – mm and 1/2mm Both Sides; mm on Both Ends One Side End Graduations 35 – mm One Edge and 1/2mm One Edge on Reverse 37 – mm and 1/2mm Both Sides
37E – mm and 1/2mm Both Sides; mm on Both Ends One Side End Graduations
300mm Full-Flexible Steel Rules with Millimeter Graduations 300mm 12.7 x 0.4mm
30 – 1/2mm One Side; mm and 1/2mm on Reverse
300mm Semi-Flexible Steel Rules with Millimeter Graduations 300mm 25.4 x 0.5mm
35 – mm and 1/2mm Both Sides
300mm Spring-Tempered Steel Rules with Millimeter Graduations 300mm 25.4 x 1.2mm
35 – mm and 1/2mm Both Sides
500mm Spring-Tempered Steel Rules with Millimeter Graduations 500mm 29 x 1.2mm
35 – mm and 1/2mm Both Sides
1000mm Spring-Tempered Steel Rules with Millimeter Graduations 1000mm 32 x 1.2mm
35 – mm and 1/2mm Both Sides
1800mm Heavy Spring-Tempered Steel Rules with Millimeter Graduations 1800mm 38 x 2.5mm
35 – mm and 1/2mm Both Sides Narrow Rule, Regular Steel Finish EDP 51329 With Standard Letter of Certification** *C330-150 W/SLC 66882 52630
With Standard Letter of Certification** C635-150 W/SLC 66893 C635E-150 635N-150 C637-150 C637E-150
55968 70164 56049 55969
*C330-300 C335S-300 C635-300 C635-500 C635-1000 51330 With Standard Letter of Certification** *C330-300 W/SLC 66883 56048 52631 With Standard Letter of Certification** C635-300 W/SLC 66894 52632 52633 C635-1800MM 64299
** Includes redemption card for Standard Letter of Certification (SLC). * Indicates rules with single row of millimeter figures (all rules under 25mm width). Rules without asterisk have double row of millimeter figures, and each edge represents the bottom edge reading left to right (rules 25mm and wider).