This content requires Adobe Flash Player version
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Communication Interface Analog and Digital Outputs; Ethernet Run Modes Data Output
Clock Frequency or Encoder Operating Temperature
Modbus TCP or OPC Server native; conversion to other platforms available 32 to 113 °F (0 to 45 °C); cooling systems available
Profile360 conforms to the Machinery Safety, Electromagnetic Compatibility, and Low Voltage directives of the EC Laser safety class by the CDRH standard is Class 3A, and the IEC 60825-1 classification is Class 3R
1. Repeatability is representative of the system's ability to monitor process variation. It is expressed as the three-sigma standard deviation in a series of measurements of a known gage block. Accuracy is representative of the system's error in measuring a known value. It is expressed as the Bias in a series of measurements of a certified gage block. Repeatability and Accuracy are based on 2012 standardized test procedure. Field results may be better or worse depending on caliper type, size and placement.
2012 Test Procedure includes thickness measurements of an independently certified test block. 20 measurements are taken at each of 10 different locations throughout the system field of view. Repeatability (3σ) and Accuracy (bias) are calculated at each position. The Repeatability and Accuracy at each of the 10 positions must be less than the specification.
2. All measurements are taken at one update per second.
INDUSTRIAL MOBILITY PACKAGE
The Profile360 Industrial Mobility Package has been employed by large extrusion operations during line set-up so that one unit can serve multiple lines. The in-line measurement provides instant information to help the operator tune-in the extruder, calibrator, and down-stream equipment, and to assure all dimensions are stable before moving on to the next line.