This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
1126 INTERNAL-EXTERNAL ADJUSTABLE SETTING MASTERS FOR STARRETT 1100 AND 1101 DIAMETER GAGES
12-60"/300-1500MM
These set masters are used to check and reset Starrett 1100 and 1101 Diameter Gages under production gaging conditions. The range is from 12-60" or 300- 1500mm.
1126 Internal-External Adjustable Setting Masters for Starrett 1100 and 1101 Diameter Gages
Photo Key Description A B C D E F
G Sensitive Head
Hardened Rest Platen Anvil
Reference Head Leveling Screws (2)
Beam – Rectangular Box Section Fixed Single Point Button Rest
1126 Internal-External Adjustable Setting Masters for Starrett 1100 and 1101 Diameter Gages Length Range
RISER BLOCK SETS CAN BE FURNISHED IN INCREMENTS OF 2" (50) TO GAGE DEPTH SETTING RANGE UP TO 6" (150) MAXIMUM
ANGULAR OR CONICAL NIBS AND RISER BLOCKS QUOTED UPON REQUEST DETAIL (1)
ANGULAR OR CONICAL FACE MASTER ANVIL NIBS CAN BE FURNISHED AND ARE INTERCHANGEABLE WITH THE STRAIGHT FACED NIBS
DETAIL (2)
RISER BLOCK
F PLANE X
G .250" (6.3) ABOVE PLANE X 2.00" (50) MAX. BELOW PLANE X. SEE DETAIL (2)
STRAIGHT-FACED MASTER ANVIL NIBS SEE DETAIL (1) BELOW
In addition to the products detailed in this section, we have made many other special function gages to suit a wide variety of our costomers' specific requirements.
If you have a special application, we invite you to submit your drawings and specifications to our Special Order Department at 121 Crescent Street, Athol, MA 01331, USA. We will be happy to provide a prompt quotation.