This content requires Adobe Flash Player version
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
features with adaptability for a wide range of internal and external measurements. The adjustable dowel rest legs ride on slotted mounting plates for horizontal adjustment. Each of the legs are vertically adjustable to obtain the proper rest position on the work and correct alignment on the gaging contacts. 2" or 50 mm range is the vertical adjustment.
The gaging contacts are radiused but may be modified by request to suit special gaging conditions.
The indicator and its housing can be rotated through to 360º so that the indicator may be read at the most convenient angle. The gage should be checked against our 1126 Master for a precise reference standard during production gaging (See the following pages).
WILL CLEAR 3-1/4" (81) 2.00 (50) MAX. DROP 3.00" (75)
1/8" (3) MAX. BELOW PLANE X
1100 and 1100M Heavy-Duty Dial Indicator Diameter Gages Photo Key A B C
D, E F, K G H I
1100 and 1100M Heavy-Duty Dial Indicator Diameter Gages Length