This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Profile360 is an in-line, real-time measurement system for continuously monitoring key profile dimensions in complex profile extrusions. Profile360 employs CrossCheck Line Laser Sensors manufactured by Starrett- Bytewise. These multi-sensor systems acquire thousands of data points around the profile and match them to a CAD template, where key measurement parameters such as width, thickness, radius, and angle are extracted. Measurement parameters are compared to allowable control limits and displayed on the operator's terminal with a green/yellow/red (pass/caution/fail) status indicator. Profile360 runs at rates up to 14 profiles per second.
Specifications Measurement Rate
Selectable up to 14 profiles/second
Communication Interface Analog and Digital Outputs; Ethernet Run Modes Data Output
Clock Frequency or Encoder Operating Temperature
Modbus TCP or OPC Server native; conversion to other platforms available 32 to 113 °F (0 to 45 °C); cooling systems available
Profile360 conforms to the Machinery Safety, Electromagnetic Compatibility, and Low Voltage directives of the EC Laser safety class by the CDRH standard is Class 3A, and the IEC 60825-1 classification is Class 3R