This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
INCH READING 5", 6"/INCH AND MILLIMETER READING 5"/130MM
These handy tools permit quick, accurate outside and inside measurements. Their compact size fits easily in shop coat pockets. Calipers are made of fine quality stainless steel.
• Readings are made directly from the two lines marked "in" and "out" on one side of the stock
• Handy inch or millimeter scale on the back of the stock
• Knurled thumb pieces to activate the slide and slide stop prevents tool from being disassembled
• Knurled clamp screw with a left hand thread for easy one-hand operation
• Straight measuring surface for outside measuring and rounded nibs for inside or hole measurements
This extremely handy caliper gives direct readings of both circumference and diameter in a single setting.
• Especially useful for obtaining instant circumference and diameter measurements of rope, cordage, metal rods, pipe, tubing, etc. and for checking cutting speeds on lathe work
• 1-3/8" deep jaws will caliper a cylinder up to 2-3/4" diameter
• The upper edge of the slide is graduated from 0 to 11 circumference inches in 16ths and the lower edge
424 Stainless Steel Pocket Slide Caliper and Circumference Gage Size