This content requires Adobe Flash Player version
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
These gages are for longer ranges, and are accurate and simple to use. Put the contact on the work to be measured and push the gage head down until the base stops at the reference point and take your reading.
Furnished with three rounded-end contact points to cover the range. Flat end contact points are also available on special order.
The zero setting can be checked with the shortest contact in place by pushing down on a flat surface.
644 Dial Depth Gages Range Graduation
0-3" .001" Dial Reading In Case Without Case Cat. No. EDP Cat. No. EDP 0-100 644JZ 52718 644J 52719 0-75mm 0.01mm 0-100 644MJZ 56027 644MJ 56028
648 Depth Gage Bases will also accommodate the 644 Dial Depth Gage.
648 DEPTH GAGE BASES
These different bases are for mounting indicators with a 3/8" (9.5mm) stem (25SC38 Stem Collet included) or an 8mm stem with optional 25MSB Split Bushing.